상기 장비는 타이머 카운터로서 , 사용하기 쉬운 경제적인  장비이며, 높은 정밀도에서의 측정으로 연구소 나 개발용으로  많이 쓰이고 있습니다.

1. 주파수 A : 0.1 Hz to 160MHz 2. 주파수 B : 0.1 Hz to 16MHz 2. 주파수 C : 70 MHz to 1.3GHz(RF적용) 3. 주파수 분해능 : 7 Digit/s 4. 측정 모드 : 주파수A,B ,펄스폭, 주기 , 듀티사이클, 하강/상승 시간, RPM , 시간격 5. Warm Up Time : 30 분 6. Battery Operating Time : 2 시간 7. 외부기준 입력 : 10 MHz Measurement Functions Measurement Functions   Time Interval, Pulse Width, Rise/Fall Time, Frequency, Burst Frequency, Period, Ratio f1/f2, Phase, Duty Factor, Totalize Frequency Input A: 10 -10 Hz to 300 MHz Input B: 10 -10 Hz to 100 MHz Input C: Optional Input Pre-Scaler   (PM9621): 70 MHz to 1.3 GHz   (PM9624): 100 MHz to 2.7 GHz   (PM9638): 300 MHz to 8 GHz Resolution: 11 digits/s measurement time Burst Frequency Input A,B,C Frequency Range Input A: Up to 300 MHz Frequency Range Input B: Up to 100 MHz Frequency Range Input C: Up to 8.0 GHz with options Start Delay Range: 200 ns to 1s, 100 ns resolution Period A Range: 3.3 ns to 10 10 s Resolution: 11 digits/s measurement time Ratio A/B, C/B Range: 10 -9 to 10 15 Frequency Range: Input A,B: 10 -10 Hz to 160 MHz   Input C: See input C frequency range. Time Interval A to B Range: 0 ns to 10 10 s Resolution: single shot 50 ps (1 ps average) Frequency Range: Up to 160 MHz Pulse Width A Range: 3 ns to 10 10 s Frequency Range: Up to 160 MHz Rise and Fall Time Range: 3 ns to 10 10 s Frequency Range: Up to 160 MHz Input Amplitude: > 250 mV p-p Phase A Relative B Range: -180º to +360º Resolution: 0.01º Frequency Range: 0.03 Hz to 160 MHz Duty Factor A Range: 0 to 1 Frequency Range: 0.11 Hz to 160 MHz Totalize A,B Range: 0 to 1017, 0 to 1010 in A-B modes Frequency Range: 0 to 160 MHz A Gated by B: Event counting on input A during the presence of a pulse on input B. Single or cumulative event counting during set measuring time. A start/stop by B: Event counting on input A between two consecutive pulses on B. Manual A-B: Input A minus input B event counting with manual start/stop. Manual/Timed A-B: Input A minus input B event counting with manual start/stop. Stop after set measuring time. Time counted from first trigger event on A. AC/DC Voltage A,B Range: -50V to +50 V Frequency Range: DC, 1 Hz to 100 MHz Mode: V max, V min, V p-p Resolution: 1.25 mV Gated Volt: External masking of unwanted signal components such as overshoot Optional TimeBase Standard: PM6681/-1- (Non-Retrofit) Calibration adjustment tolerance*** at +23ºC ± 3ºC: < 1 x 10-6 Uncertainty due to:   Aging /24 hr: N/A* Aging /month: < 5 x 10-7 Aging /year: < 5 x 10-6 Temperature Stability (reference temp at +23ºC): 0-50ºC: < 1 x 10-5   20ºC -26ºC: £ 3 x 10-6 Line Voltage variation of ±10%: < 1 x 10-8 Power On Stability: Not Specified Total Uncertainty**** at 2s (95%) confidence interval and at 23ºC ± 3ºC: After 1 Year Cal interval < 7 x 10-6   After 2 Year Cal interval < 1.2 x 10-5 Total Uncertainty**** at 2s (95%) confidence interval and at 0-50ºC: After 1 Year Cal interval < 1.2 x 10-5   After 2 Year Cal interval < 1.5 x 10-5 OCXO: PM6681/-5- (PM9691) Calibration adjustment tolerance*** at +23ºC ± 3ºC: < 2 x 10-8 Uncertainty due to:   Aging /24 hr: < 5 x 10-10** Aging /month: < 1 x 10-8 Aging /year: < 7.5 x 10-8 Temperature Stability (reference temp at +23ºC): 0-50ºC: < 5 x 10-9   20ºC -26ºC < 6 x 10-10 (typical values) Line Voltage variation of ±10%: < 5 x 10-10 Power-on stability: 1 x 10-7 Deviation versus final value after 24 hr on time, after a warm-up time of: 15 min Total Uncertainty**** at 2s (95%) confidence interval and at 23ºC ± 3ºC: After 1 Year Cal interval: < 9 x 10-8   After 2 Year Cal interval: < 1.5 x 10-7 Total Uncertainty**** at 2s (95%) confidence interval and at 0-50ºC: After 1 Year Cal interval: < 1 x 10-8   After 2 Year Cal interval: < 2 x 10-7 OCXO: PM6681/-6- (PM9692) Calibration adjustment tolerance*** at +23ºC ± 3ºC: < 5 x 10-9 Uncertainty due to:   Aging /24 hr: < 3 x 10-10** Aging /month: < 3 x 10-9 Aging /year: < 2 x 10-8 Temperature Stability (reference temp at +23ºC): 0-50ºC: < 2.5 x 10-9   20ºC -26ºC < 4 x 10-10 (typical values) Line Voltage variation of ±10%: < 5 x 10-10 Short term stability: (root Allan Variance)   T = 1 s: 1 x 10-11   T = 10 s: 3 x 10-12   T = 100 s: 1 x 10-12 Power-on stability: 5 x 10-9 Deviation versus final value after 24 hr on time, after a warm-up time of: 10 min Total Uncertainty**** at 2s (95%) confidence interval and at 23ºC ± 3ºC: After 1 Year Cal interval: < 2.5 x 10-8   After 2 Year Cal interval: < 5 x 10-8 Total Uncertainty**** at 2s (95%) confidence interval and at 0-50ºC: After 1 Year Cal interval: < 2.5 x 10-8   After 2 Year Cal interval: < 5 x 10-8 *N/A: Not discernible, neglectable versus 1°C temperature variation. **After 48 hours continuous operation ***Calibration Adjustment Tolerance: Is the maximal tolerated deviation from the true 10MHz frequency after a calibration. When the reference frequency does not exceed the tolerance limits at the moment of calibration, an adjustment is not needed. ****Total uncertainty: Is the total possible deviation from the true 10MHz value under influence of frequency drift due to aging and ambient temperature variations versus the reference temperature. The operating temperature range and the calibration interval are part of this specification. Input and Output Specifications Input A & B Frequency Range:   AC coupled: 10 Hz to 300 MHz DC coupled: DC to 300 MHz Coupling: AC or DC Rise time: Approximately 1.1 ns Impedance: 1 MΩ //15 pF or 50Ω , VSWR< 2:1; 1 MΩ//65 pF or 50Ω with PM 9611/80 rear panel inputs Trigger Slope: Positive or negative Channel Inputs: Separate, Common A or Swapped Max. channel timing difference: 500 ps Sensitivity (SineWave): 20 mV, up to 100 MHz   25 mV, 100 MHz to 200 MHz   40 mV, 200 MHz to 250 MHz   60 mV, > 250 MHz Pulse Width: > 5 ns at 60 mV p-p, > 3 ns at 90 mV p-p Attenuation: X1 or X10 Hysteresis Window (x1): 20 mV p-p Variable Hysteresis A (x1): 30 mV p-p to 10 V p-p up to 120 MHz Dynamic Range: 60 mV p-p to 10 V p-p (up to 100 MHz) within ± 5V window   75 mV p-p to 10 V p-p (100 to 200 MHz) within ± 5V window Trigger Trigger Level: Read out on display Range: (x1): -5V to + 5V   (x10): -50V to + 50V Resolution: (X1): 1.25 mV Uncertainty: (x1): ±(4 mV + 0.8% of trigger level) Auto Trigger Level   Trigger level is automatically set to 50% of input signal. Frequency: > 1Hz Low Pass Filter A   100 kHz fixed. > 40 dB attenuation at 1 MHz Digital Low Pass Filter   1 Hz to 5 MHz using trigger hold off Trigger Indicator   Tri-State LED indicator Trigger Slope   Positive or Negative Damage Level 1 MW Impedance: 350V (DC + AC peak) at DC to 440 Hz, falling to 12 Vrms (x1) and 120 V rms (x10) at 1 MHz 50W Impedance: 12V rms Optional Pre-Scalers Input C (PM 9621) Frequency Range: 70 MHz to 1.3 GHz Pre-Scaler Factor: 512 Sensitivity: 10 mV rms to 12V rms, 70 to 900 MHz   15 mV rms to 12V rms, 900 to 1100 MHz   40 mV rms to 12V rms, 1100 to 1300 MHz Amplitude Modulation: DC to 0.1 MHz: Up to 94% depth   0.1 to 6 MHz: Up to 85% depth   Minimum signal must exceed Input Sensitivity Threshold Impedance: 50Ω nominal, AC coupled, VSWR < 2:1 Max. Voltage without Damage: 12V rms pin diode protected Connector: BNC Input C (PM 9624) Frequency Range: 100 MHz to 2.7 GHz Pre-Scaler Factor: 32 Sensitivity: 20 mV rms to 12V rms, 100 to 300 MHz   10 mV rms to 12V rms, 0.3 GHz to 2.5 GHz   20 mV rms to 12V rms, 2.5 GHz to 2.7 GHz Amplitude Modulation: DC to 0.1 MHz: Up to 94% depth   0.1 to 6 MHz: Up to 85% depth   Minimum signal must exceed Input Sensitivity Threshold Impedance: 50Ω nominal, AC coupled, VSWR < 2:1 Max. Voltage without Damage: 12V rms pin diode protected Connector: Type N Female Input C (PM9638) Frequency Range: 300 MHz to 8 GHz Pre Scalar Factor: 256 Operating Input Voltage Range: 300...500 MHz: -21...+30 dBm   0.5...3.0 GHz: -27...+30 dBm   3.0...4.5 GHz: -21...+30 dBm   4.5...6.0 GHZ: -15...+30 dBm   6.0...8.0 GHz: -9...+30 dBm Impedance: 50Ω nominal, AC coupled, VSWR < 2:1 Max input voltage without damage: 7V RMS, pin diode protected Damage Connector Type N female Rear Panel Inputs And Outputs External Reference Input D Range: 1,2,5 or 10 MHz, > 200 mV signal. Arming Input E   Most measurement functions can be performed via arming input. Range: DC to 100 MHz Slew Rate: > 2V/µs Trigger Level: TTL, 1.4V nominal Trigger Slope: Positive or Negative Damage Level: 25V peak Reference Output G Frequency: 10 MHz, Sine Wave Output: > 0.5 V rms into 50Ω load, > 0.7 V rms into hi impedance load. AC coupled Gate Open Output H Ouput Level: Closed: < 0.4 V   Open: > 1.4 V into 50Ω Internal Delay: 20 ns Trigger Level Outputs Output Level: Trigger Level/Attn Setting Impedance: 100Ω Probe Compensation Output   Buffered outputs for input A & B signals. Best used for adjustment of probes to best pulse response for the combination of probe and counter input. Analog output   0 to 4.98 V in 20 mV steps, derived from three consecutive digits selected from the measurement result. Auxiliary Functions Trigger Hold-Off Time Delay Range: 60 ns to 1.34s, 10 ns resolution Event Delay Range B: 2 to 224-1, max. 100 MHz External Arming   External signal on input E can be used to inhibit start and/or stop triggering. Arming Delay   Arming can be delayed with respect to the external arming trigger event until either the preset arming time has elapsed or the preset number of trigger events on B has occurred. Time Delay Range B & E: : 200 ns to 1.6 s, 100 ns resolution Event Delay Range B: 2 to 224-1, negative slope (up to 20 MHz) Statistics   Min, Max, Mean and Standard Deviation. Statistics may be applied to all measurement functions with the exception of Manual Totalize. Sample Size: 1 to 2 x 109 samples Mathematics   Mathematics may be applied to all measuring functions. Functions: (K*X+L)/M or (K/X+l)/M where: X is the current reading and K,L, and M are selectable constants Other Functions Measuring time   Single cycle, 80, 160, 320, 640, 1280 ns and 20 ms to 20s (or to 400s for some functions) Display Hold   Freezes measuring result, until a new measurement is initiated via Restart Settings   20 instrument settings can be saved and recalled from internal non-volatile memory. 10 can be user protected. Auxiliary Menu   Gives access to additional functions Display   10-digit LCD with high-luminance backlight GPIB Interface Programmable Functions: All front panel accessible Interface Functions: SH1, AH1, T6, L4, SR1, RL1, DC1, DT1, E2 Time Stamping (PM 6681): 125 ns resolution Measurement Rate* Via GPIB: 250 readings/s To Internal Memory: 8k readings/s Internal Memory Size: * Up to 6100 readings Data Output: ASCII, IEEE double precision floating point Software: TimeViewTM Time & Frequency Analysis Software   TimeView runs on an IBM PC/AT or compatible with VGA/EGA monitor as a DOS application (standard).   TimeView 81W for Windows is available as an option Data Capture Modes and Measurement Rate Free Running Measurement: 8k readings/s Repetitive Sampling: Up to 10 MHz Continuous Single-Period: Up to 40k readings/s (200 ns resolution) Waveform Capture: Available with PM6681 Data Analysis Features: Measurement data vs. time, FFT Graph, Root Allan Variance, Smoothing function, Zoom function, Cursor measurements, Distribution Histogram, Setup and Measurement, Data Archive and Printing *Depending on measurement function and internal data format General Specifications Environmental Data Operating Temp: 0ºC to +50ºC Storage Temperature: -40ºC to +70ºC Vibration: 3G at 55 Hz per MIL-T-28800D Shock: Half-sine 40G per MIL-T-28800D. Bench handling. Shipping container. Reliability: MTBF 30 000 h (calculated) Safety: According to CE-regulation 73/23 EN61010-1 CAT II, Pollution Degree 2 EMC: Emission according to EN 50081-1, EN 55011 Immunity according to EN 50082-1, inclusive IEC 801-2, -3, -4 Power Requirements   90V rms to 265V rms, 45 Hz to 440 Hz, 35W Mechanical Data Width: 315 mm (12.4 in) Height: 86 mm (3.4 in) Depth: 395 mm (15.6 in) Weight: Net 4 kg (8.5 lb),   Shipping 7 kg (15 lb)

고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

• 배송 방법 : 택배
• 배송 지역 : 전국지역
• 배송 비용 : 무료
• 배송 기간 : 3일 ~ 7일
• 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
  고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
  

교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
  경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
  다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
  포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
  (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
  따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
  제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
  (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
  (색상 교환, 사이즈 교환 등 포함)

상품의 사용후기를 적어주세요.

게시물이 없습니다

상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다