Items / Models |
LSS-15AX B1RB |
LSS-15AX B3R-G583 |
Output surge waveform |
1.2/50ms, 8/20ms (Combination waveform) 0.5ms-100kHz (Ring wave) |
Maximum output voltage (current) |
15kV/7500A (Combination wave) 12kV/1000A (Ring wave) |
Output polarity |
Positive or negative |
Surge switching element |
By ignitron |
Surge repeat cycle |
20 seconds (Combination wave: at 15kV) 10 seconds (Ring wave: at 12kV) |
Output impedance |
2 Ω (Combination wave) 12 Ω (Ring wave: when current limiting 500A is selected.) 30 Ω (Ring wave: when current limiting 200A is selected.) |
Injection surge waveform |
Combination waveform 0.5㎲-100kHz Ring wave |
Maximum injection surge voltage (current) |
15kV/ 7500A(Combination wave) 12kV/1000A (Ring wave) |
Surge coupling |
Normal mode: 18 ㎌, Common mode: 10Ω +9㎌ |
Coupling Mode |
L1-PE, L2-PE, L1-L2, L2-L1 |
L1-PE, L2-PE, L3-PE, N-PE, L1-L2, L1-L3, L1-N, L2-L1, L2-L3, L2-N, L3-L1, L3-L2, L3-N, N-L1, N-L2,N-L3 |
Injection AC power capacity |
Single phase AC240V/30A max |
Single/3-phase AC600V/50A max |
Injection DC power capacity |
DC60V / 20A |
Decoupling coil |
1.5mH (Each phase) |
Decoupling condenser |
10㎌ (Between lines, Between line and PE) |
Phase angle control |
0˚~360˚ (At step of 1˚) |
Check circuit output ratio |
1/2000 (V·MON), 1/1000A (A·MON) |
Type of check circuit |
Waveform measuring system using magnetic coupling |
Surge generating unit |
Surge waveform change Current limiting change Polarity change Surge output change |
AC/DC injection unit |
Surge injection phase change Surge return phase change Coupling element change |
Memory card (Option) |
SRAM Memory card of JEIDA V4.1 (less than 1MB) can be used. For DOS file format |
Remote control (Option) |
32 key infrared light remote control, Battery: UM-4 2 pcs. |
Test mode |
Manual test mode Program test mode |
Waveform monitor |
Peak level indication Break-down indication |
Power supply |
AC90~120 200~240V 450VA |
Dimensions |
555 (W) x 1250 (H) x 790 (D) mm |