Model |
- FNS-AX3-A16A / FNS-AX3-B50A
|
|
개요 |
- 전기 전자장비들의 오동작은 스위치성 노이즈와 같은 전기적인 빠른 과도현상에 의해 발생되며, 이러한 오동작의 문제점을 제품개발 시점부터 검토하게 되었고, 현재에 이르러서는 국제규격인 IEC pub. 61000-4-4 (EN 61000-4-4)에 대응하는 FAST TRANSIENT NOISE를 인가함으로써, 스위치성 노이즈 관련 Immunity시험을 채택하고 있다. FNS -AX Series는 IEC 규격에서 요구하는 반도체 Switch 방식을 채택하였으며, 사용자의 조작성을 위하여 Front Panel을 Touch Panel Color LCD를 채택하였으며, 연속Program을 만들어 자동 시험이 가능하다.
|
|
특징 |
- IEC규격에서 요구하는 모든 시험이 가능함은 물론, Field에서의 오동작 재현이나 대책 시험기로 기능을 중시해,
10분 연속 Pulse인가시험, 극성 자동반전 기능 및 Pulse 주파수 변조 기능등을 채택하여 Field에서의 문제점에 좀 더 접근하여 시험 할 수 있도록 설계되어 졌다.
- IEC 규격에서는 시험기의 위치를 바닥의 Ground Plane위에 올려놓고 사용하게 되어 있어, Stand Type으로
디자인되었고, 조작성이 우수하여 장시간 사용해도 불편하지 않다.
- 사용자는 각 시험 조건에 맞는 Manual Mode, Program Mode 및 Remote Mode를 사용하면 자동으로 시험을
실시하여 빠른 시간 내에 손쉽게 시험 결과를 얻을 수 있다.
- 시험중 안전을 고려하여 긴급사태 발생시에 빠른 대응이 가능토록 피시험체의 전원과 본 시험기의 출력을
동시에 정지시키는 비상정지 스위치가 장치되어 있다.
- 각종 Outlet Panel(Consent)이 구비되어 있으며, GP-IB 또는 RS-232C를 이용한 외부와의 Interface도
가능하다.
|
|
Option |
- Injection Unit (3Phase AC480V 150A), CDN-151
- Coupling Clamp, 15-00001A
- EMS Probe Kits, H2-B
- Outlet Panel (Multi 250V/15A), 18-00077A
- Attenuator for Observation of Waveform (50Ω), AT-810
- Attenuator for Observation of Waveform (1㏀), AT-811
- EFT 시험환경설비, FNS-801-D
|
|
Spec |
Items |
FNS-AX3-A16 |
FNS-AX3-B50 |
Output voltage |
200 to 4800V |
Pulse parameters at 50 ohm |
Pulse rise time 5ns ±30%, Pulse width 50ns ±30% |
Pulse parameters at 1k ohm |
Pulse rise time 5ns ±30%, Pulse width 35ns ±150% |
Polarity |
Positive, Negative, Polarity change burst by burst |
Pulse frequency |
0.1㎑ to 2㎒ |
Burst duration |
1to 1000 pulses or continuous ≤ 1 pulse per 1ms vurst period |
Burst period |
10 to 1000ms ±10%, 10ms step |
Continuous mode operation |
10㎑ max (0.2 to 1㎸) |
Dynamic output impedance |
50ohms |
Output connector |
Coaxial (pulse out) |
Coupling / DC blocking capacitor |
33㎋/10㎋ |
Frequency modulation |
0 to -10% of setting |
Timer (test duration) |
1s to 9h 59m 59s 10 minutes max in the "conuinuous" and alternate polarity modes |
External trigger |
TTL down edge Minimum trigger interval acceptable : 10ms |
Burst timing |
Non-synchronization |
Irrespective of EUT mains frequency |
Synchronization |
Synchronizes with the EUT mains frequency 0 to 360 degrees ±10 degrees, 1 degree step Burst period : 50/60㎐ |
Internal CDN |
85 to 240VAC 16A 50/60㎐ 3-wire single-phase 125V DC/16A |
85 to 500VAC 50A 50/60㎐ 5-wire three-phase 125V DC/50A |
Internal CDN |
L, N, PE |
L1, L2, L3, N, PE |
Coupling mode |
Common mode |
Dimensions (projection included) |
(W)320 × (H)352× (D)400mm |
Character display |
English, Chinese, Korean or Japanes |
Weight |
Approx. 14㎏ |
Approx. 19㎏ | |