Specifications

Channel

1 channel - 4 channels (Max. 4 channels)

Trigger output for Oscilloscope

One point / BNC connector / 0-5 Active low
    Set a trigger point at an arbitrary point in waveform generating
    software. Observe generating waveforms with using trigger
    function of oscilloscope.

Waveform generating method

Partial waveform memory + DSP operation output
    Output sampling waveform by CSV data

Output voltage

0.00 to ± 6.00V

Output current

5㎃ max.

Output impedance

50 ohm

Resolution (Setting)

0.01A

Resolution (Output)

1.221㎷

Offset voltage

±6.0V

Frequency response character

150㎑ max (±6.00V amplitude sine wave)
    150㎑ max (±6.00V amplitude rectangular wave)

Frequency accuracy

±20ns + 50ppm 9accuracy of cycle time is whole frequency rang)

Rise time / Fall time

Less than 100ns (0±1.00V swing)

Through rate

20V/㎲

Synchronization accuracy

Capable of adjusting the dispersion of the response time of each     power amplifier (up to 10㎲, with 0.1㎲ step)
    Capable of keeping the synechronization accuracy between
    channels less than 1㎲ at the output terminal of the power amplifier

Calibration output

1 ㎑ 1V-p-(for test)

PC interface

USB1.1

Dimensions

Approximately (W)430 × (H)400× (D)200mm

Weights

Approximately 10㎏