() 해외배송 가능
판매가 | |
---|---|
소비자가 | 0원 |
적립금 |
|
무이자할부 | |
제조사 | lutron |
원산지 | 대만 |
상품코드 | P0000FUZ |
수량 | |
국내/해외배송 | |
SNS 상품홍보 | |
QR코드 | |
QR코드 보내기 |
Accredited calibration/NIST traceable calibration certificate for REED CC-421 Voltage/Current Calibrator (Discontinued) might be available on request (for an extra charge). Please contact us for more info.
This Reed CC-421 Voltage/Current Calibrator has been discontinued. Information shown here is for reference only.
We recommend the new REED R8801 Current/Voltage Calibrator Measure. Reed R8801 measures loop current (0-22 mA) signals with very high accuracy of 0.03% and 0.001 mA resolution as well as voltage output process signals from PLCs, transmitters
Current source with Reed CC-421
Firstly, you have to connect the "Cable Plug" into the "Input Socket". Secondly, select the "CURRENT SOURCE" by switching the Reed CC-421's function switch. Now, with Reed CC-421 into the current source mode be shure you will select the display resolution (max. display is 19.99 mA). By "Calibration Adjust knob" will generate the current output same as the display value.
Current measurements
You can made current measurements with Reed CC-421 after you have connected the "Cable Plug" into the "Input Socket" and select the "mA MEASURE" function and the range of measurements (as an example 0.01 mA display resolution from a max. display of 19.99 mA ).
Power and current measurement of two wire loop with REED CC-421
Sliding the "Function Switch" to the "POWER/ mA MEASURE " position will ensure you that the REED CC-421 is set for power and current measurements. Select the range and open the circuit in which current is to be measured. Finally, connect the "Alligator Clips" securely in series with the load in which the current is be measured.