() 해외배송 가능
판매가 | |
---|---|
소비자가 | 0원 |
적립금 |
|
무이자할부 | |
제조사 | B&K |
원산지 | |
상품코드 | P0000FWC |
수량 | |
국내/해외배송 | |
SNS 상품홍보 | |
QR코드 | |
QR코드 보내기 |
The analog power amplifier 2719 B&K was developed for the control of vibration test systems with a maximum of 180 VA. The RMS output power is calculated at a load impedance of 0.8 Ohm. The frequency of the power amplifier ranges from 40 Hz to 20 kHz at full power or with DC to 100 kHz with reduced power and minimum har-monic distortion. The device offers extremely stable operation within the specified temperature and voltage range and is therefore highly reliable. The analog power amplifier allows operation in both voltage and current mode. Its RMS output current limit is variable.
Continuous Sine Output Power | 180 VA |
Frequency Range small Signal | DC – 100 kHz |
Frequency Range at full Power | 40 Hz – 20 kHz |
Optimum Impedance | 0,8 Ohm |
Current Mode | Yes |
Voltage Mode | Yes |
Phase Shift | Yes |
Max. Voltage (RMS) | 12,0 V |
Max. Current (RMS) | 15,0 A |
Input Voltage | < 5 V |
Nonlinear Harmonic Distortion Factor | < 0,1 % |
Noise and Hum | > 90 dB |
Dimensions W x H x D (mm) | 482 x 88 x 450 |
Weight (kg) | 14 kg |
Protection Circuits | Current Limiting Temperature Control Clipping |