상품상세정보
Product Description
The TC-1101B FLEX Pager Tester is an efficient and cost effective solution from TESCOM that satisfies the exacting test requirements of high performance pagers with FLEX and POCSAG protocols. Combined with the industry standard TC-5010B Mini TEM Cell, the TC-1101B gives the user an economic, high quality, pager test platform for production, service or in an R&D environment. The system does not require a large and expensive shielded or screened room.
This user-friendly product provides an intuitive interface that minimizes training costs, reduces errors and maximizes efficiency. The TC-1101B offers a perfect match to the users needs. This is a direct result of the unique combination of TESCOM's extensive experience in the pager industry and our commitment to SIMPLICITY, USABILITY, performance and quality in all TESCOM products.
Benefits for Users of TESCOM's FLEX / POCSAG Test Platform
Easy to use and accurate, even for novice operators
Low training costs
No Shielded room is necessary, reducing space requirements and costs
The most cost effective overall solution to FLEX / POCSAG testing
A comprehensive range of test accessories
Industry standard quality and accuracy of measurement
Effective and economic customer support, advice and consulting
Key Features
Precision high quality RF Signal Source: Full pager band coverage, EMI proof
Integrated Encoder : POCSAG, FLEX (G1.9), FLEX-TD
Use with Internal or External Modulation Source
Convenient built-in messages : Numeric, Alphanumeric
Powerful Message Repeat Functions : Message or Address Increment
(Single, repeat mode), Burst, Continuous mode, etc.
Store and Recall up to 100 channels (Frequency, Data rate and Message)
Industry Standard Pager Test and Service Platform when used with
TC-5010B TEM Cell
Convenient RESYNC test mode for FLEX pager testing
Provides all test signals required for receiver alignment
Built-in IF Frequency Counter & AC Level meter for 455 kHz, 140 kHz, Zero IF
IF output for injection test: 45MHz, 44.9625MHz, 29.25MHz, 21.7MHz, 21.4MHz,
17.9MHz, 455kHz, 450kHz and 140kHz
High Stability TCXO for excellent RF frequency accuracy
Remote Operation for Test Automation and Productivity
Electronic Attenuator and Modern PLL design guarantees high reliability
Low Power Consumption and Universal Voltage AC input < 10W, 85V-264V AC
Additional Features in this Latest Model
Bessel Filter (10th order)
DC Power supply
External Oscillator Function
TC-1101B/1002B Specifications FLEX | POCSAG | FLEX-TD | Miscellaneous
RF Signal Generator
Frequency Range
- Band 1 (130MHz~175MHz)
- Band 2 (260MHz~485MHz)
- Band 3 (929MHz~933MHz)
Resolution : 2.5kHz step
Stability :+/-1.0ppm, -20 to 70 deg. C with Internal TCXO.+/-0.5ppm/year Aging
Residual FM (Typical) : <10Hz in Band1 and Band3*, <20Hz in Band2
Modulation : NRZ FSK, or External Input
- Band Width : Filter off : Typical -3dB @7kHz
Filter on : 10th order Bessel Filter, -3dB @3.9kHz .
- FM Deviation : 1.0kHz to 7.0kHz, 0.1kHz steps.
- FM Accuracy :+/-5%. (4.5kHz, 4.8kHz)
RF Level
- Range : -20.0dBm ~ -120.0dBm, 0.1dB steps (Band 1, Band 2)
-30.0dBm ~ -120.0dBm, 0.1dB steps (Band 3*).
- Accuracy : +/-1dB, +/-5%
RX IF (IF Monitor, BNC Rear Panel)
- Input Impedance : 10 k ohm
- Freq. Counter : 30kHz ~ 500kHz ( >= 5mVp-p)
- AC Volt meter : 50mVp, 1kHz to 500kHz
IF Frequency Output (BNC Rear Panel)
- Output Impedance : 50 ohm
- Level : Approx. -16dBm
- Freq. : 140kHz , 450kHz , 455kHz , 17.9MHz , 21.4MHz , 21.7MHz, 29.25MHz,
44.9625MHz ,45MHz
External Modulation Source (Front Panel BNC Connector)
- Encoder Output ( POCSAG, FLEX, or FLEX-TD) :
+/- 2.0 Vpeak into open circuit, or+/-1.0 Vpeak into 600 W
- External Modulation Input :+/-1.0Vpeak, Rin = 600 W
Interface : RS-232C Interface (9600BPS) for PC, Mouse I/F(1200BPS)
Store and Recall : 00~99 sets of data.
- POCSAG : Code Format, Address, Frequency, Level, BPS, Function Bits
- FLEX : Code Format, Address, Frequency, Level, BPS, Frame Offset
External Reference Input : 10MHz, Input Voltage >=150mV RMS,
>1KW Oscillator
Modulation Filter : 10th Order Bessel Filter Fc=3.9KHz
DC Output : 1.5+/- 0.05V DC, Max. Current 300mA, Short Protected
POCSAG Encoder
Code Type : POCSAG (CCIR Radio-paging Code NO.1)
Message Type : Tone Only, Numeric, Alphanumeric
(ASCII, KSC-5601, GB 2312-80, CNS)
Service Code : Test pattern (1010....) ON/OFF
Data Rate : 512, 1200, 2400 bps.
Function Bits (Tone type) : A, B, C, D
Address Range : 0000008X to 2097151X, where X is the function bit.
Data Polarity : Normal, Inverse
Repetition Mode : Single, Burst, Repeat, Continuous
Encoder Time Base Stability :+/- 5ppm (0 to 50 deg. C)
FLEX Encoder
Code Type : FLEX (issue G 1.9), FLEX-TD
Vector Type : Numeric (Standard/ Special/ Numbered), Alphanumeric (7bit only or 14bit), Secure Message,Short Instruction, Short Message, HEX/ BIN.
Service Code (ON/OFF/RESYNC) : Turns ON/OFF the test pattern.
RESYNC test mode.
Data Rate : 1600/2, 3200/2, 3200/4, 6400/4 [BPS/Level]
Address Range
- Short Address : 0,000,001~1,933,312
- Information Service Address : 2,009,088~2,025,471
- Network Address : 2,025,472~2,029,567
- Temporary Address : 2,029,568~2,029,583 (00~15)
- Operator Messaging Address : 2,029,584~2,029,599
- Long Address : X2,101,249~X4,291,000,000 where X is an alpha character
{A~L,U~Z}
Cycle : 0~14
Frame : 0~127
Phase : A, B, C, D
Collapse Cycle : 0~7 (used in Burst and Continuous Mode)
Header (Idle) : ON, OFF, ON(SSID) selectable
Terminator (Asynchronous) : ON/OFF selectable
Roaming (SSID) : LID (Local ID), CZ (Coverage Zone), CC (Country Code),
TMF (Traffic Management Flag), 3 Test Messages to choose
Roaming (NID) :NA (Network Address), SA (Service Area), MUL (Multiplier),
TMF (Traffic Management Flag), 3 Test Messages to choose
Data Polarity : Normal, Inverse
Repetition Mode : Single, Repeat, Burst, Continuous
Maximum Message Length in Repetition mode: 600 ASCII Char. In Single or
Repeat mode, but limited to 180 ASCII Char. in Burst/Continuous
mode due to FLEX framing requirement.
Date & Time Input : Year, Month, Day, Hour, Minute, Second
Encoder Time Base Stability :+/- 5ppm (0 to 50 deg. C).
FLEX-TD Encoder
FLEX Time-Diversity Simulation : valid in Single mode only 40 digit max.
Diversity Repeat Number : 0~3
All standard FLEX functions are supported in FLEX-TD mode.
Miscellaneous
Line Voltage : 85V~264VAC (Free Voltage), 47~440Hz.
Power Consumption : 10 W max.
Dimension : 217(W) x 330( L) x 148(H) [mm]
Weight : 6kg
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE