상품상세정보
Applications
TESCOM TC-5942A/B/C Pneumatic Shield Box provides an efficient RF
isolated test environment for the manufacturing of mobile phones and PCB assemblies
Features
Pneumatic control for manual or semi-automatic operation
High RF shielding, > 80 dB
EMI filters on all data and DC lines
RS-232C open-close control
Safety protective cover (5942B and C)
Customization to meet various data and RF connection requirements
Easy-to-exchange customized fixtures
Red and Green LED for the pass/fail indication
CE compliant. EN 50081-1, EN 50082-2 and EN 60950 (TC-5942C)
Customization
Target devices: mobile phones, PCBs and similar devices
Customizable signal connections:
Device control data
Analog/digital probe signals on a PCB under test
Tx/Rx signals
RF probe signal
OTA RF coupling
SIM card and DC power connection
Acoustic coupling (depending on shape of mobile phone)
Lid Operation
· Long Life. Typically 1,000,000 open/close cycle
· Ability to control lid opening and closing speed
· Lid opens when the compressed air is connected or power is turned on
· Built-in electronics open/close counter, able to read the number of times by control PC
· Lid moves downward at the air pressure of 2 bar (kg/cm2) or less until the lid is 5 mm above bottom plate (Option 5942-70).
Fixture Customization
Typically, every device has a unique outline and connection configuration requiring unique handler and fixture customization to move DUT in and out of the cell and make data/RF connections, and to move probe pins or connectors up and down for signal probing.
TC-59421A Typical Fixture
Fixtures fitted
Specifications
Shielding effectiveness: > 80 dB to 2 GHz including connectors. Typically >70 dB to 2.4 GHz
RF connector: Type N outside, SMA inside
Data connector: One 9 pin and one 25 pin D-Type, filtered
Data line capacity: 100 VDC, 3 Amps maximum
Remote control: RS-232C, 3 wire, 9 pin D type
Compressed air requirement: 6.5 to 10 bar
Compressed air connector: Sang-A PMM06, 6 mm push on fitting
Air connector between handler/fixture and main body: 4 mm push on fitting
Line voltage: 100 to 240 volt AC, 50/60 Hz, 16 watt
Working space: 256(W) x 125(D) x 80(H) mm
Dimension: 330(W) x 235(D) x 261(H) mm, close state. 416(H) mm, open state
Weight without handler and fixture: 12 kg
Accessories supplied: N to N cable, DB9 RS-232C cable, DB9 and
DB25 data cable, Spare pogo pins if applicable, Power cable, Operating manual
Ordering Information
TC-5942A, Dual open/close switch. Wider side front.
TC-5942B, Single open/close switch. Narrower side front. Clear plastic safety cover.
TC-5942C, CE compliant version of 5942B. EN 50081-1, EN 50082-2 and EN 60950
5942-01, Safety Bar, for 5942A
5942-70, Dual pressure mode lid control, for 5942B
5942-80, Spare shielding gasket, set of 2 pcs
5942-90, Absorber pad for additional 5 sides, for 5942A
TC-59421A, Fixture for 5942B/C
59421-10, Body, DUT handler, for horizontal movement
59421-15, Cradle, for DUT
59421-20, Holder, for DUT data connector
59421-30, Probe Mount, for vertical cylinder
59421-35, Probe Assembly, for vertical movement
59421-40, Adaptor Bracket, for RF assembly
59421-42, RF Probe, for PCB
59421-44, Antenna Coupler, OTA (Over-the-air)
59421-60, Acoustic Test Fixture (Tone only)
교환 및 반품 정보
교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내
교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
(예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
(자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
(색상 교환, 사이즈 교환 등 포함)